Aluminum Nitride Terminations
10 Watts, 50
Model RFP-10N50TV
Outline Drawing
.300
.100
.200
.100
.050
.116 DIA.
.100
.060
.130
N50
Aluminum Nitride Flanged T
e
rminations
1
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Features
DC 6.0 GHz
10 Watts
Aluminum Nitride (AlN) ceramic
Welded Silver Leads
Non-Nicrome Resistive
Element
Low VSWR
100% Tested
Notes: Tolerance is .010, unless otherwise specified. Operating
temperature is -55C to +150C (see chart). Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions are in inches. Lead
length 0.15" minimum.
Specifications subject to change without notice.
Electrical Specifications
Resistance Value:
50 ohms, 5%
Frequency Range:
DC - 6.0 GHz
Power:
10 Watts
V.S.W.R.:
1.25:1
General Specifications
Resistive Element:
Thick film
Substrate:
Aluminum nitride ceramic
Cover:
Alumina ceramic
Mounting Flange:
Copper, nickel plated per
QQ-N-290
Lead(s):
99.99% pure silver (.005" thk)
VER. 12/5/01
Aluminum Nitride Flanged T
e
rminations
Model RFP-10N50TV
Typical Performance
2
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Power Derating
Suggested Mounting Procedures
SCALE:
BOARD EVEN
WITH LEAD.
THAN LEAD.
BOARD LOWER
SUGGESTED STRESS RELIEF METHODS
(2 PLACES)
.025
MIN.
1. Make sure that the devices are mounted on flat surfaces
(.001" under the device) to optimize the heat transfer.
2. Drill & tap the heatsink for the appropriate thread size to be
used.
3. Coat heatsink with a minimum amount of high quality
silicone grease (.001" max. thickness).
4. Position device on mounting surface & secure using socket
head screws, flat & split washers. Torque screws to the
appropriate value. Make sure that the device is flat against
the heatsink. (Care should be taken to avoid upward
pressure of the leads towards the lid).
5. Solder leads in place using an SN63 type solder with a
controlled temperature iron (700F).
NOT RECOMMENDED APPLICATION
BOARD LOWER
THAN LEAD.
THAN LEAD.
BOARD HIGHER
SCALE:
CASE TEMPERATURE --
C
% OF RATED POWER
150
125
100
75
50
25
100
75
25
50
0
PDF 
ZIP